How to Find Correct Replacement Wheel Studs for Forest River Wildcat 5th Wheel

Question

Question:

looking for wheel lug studs for 2008 Forest River 5th wheel Wildcat model 30fsbs.

asked by: Jim B

0

Expert Reply:

In order to find the correct wheel studs for your trailer you'll need to measure your existing since there is no way to look this up with the make and model of the trailer. The Trailer Hub Wheel Stud part # 7-122 for example measures 1/2" in diameter 2" long. If this won't work for you, please feel free to provide me with your dimensions or choose from the list linked below.

expert reply by: Conner L

0

Answer 1

Hey Tyler! The Trailer Hub and Drum Assembly #TRU48AV is pre-greased which means the bearings and grease seal are already installed. If you're replacing an existing hub I would make sure you have 9/16" diameter studs, and your existing…

view full answer...

Answer 2

Hi Kenneth! Since your 2023 Brinkley Z 3100 5th wheel has 7k axles, I recommend grabbing the Terran Axle Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 6-7K #TX77ZJ. These are priced very well, fit the standard 5 bolt pattern…

view full answer...

Answer 3

Hello, and thanks for providing all of that information for your axle. I had my contact at Lippert run the item number and serial number. Your axle is a standard 3,500 lb axle and it used the standard bearing and seal sizing. Our bearing kit #BK2-100…

view full answer...

Answer 4

I was able to find the 126003 hub and was able to determine that it is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern just like the #AKHD-545-35-K that you referenced. This hub will work as a replacement for your Lippert.

view full answer...

Answer 5

Thanks for the picture. Yes, it is. I checked with Furrion and the correct replacement for the F0S04TDE-RD/SY lights are the LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems item #FCE48TASL if you need the camera's.…

view full answer...

Answer 6

Hey Nathan, the trailer hub part #TRU55FR that you referenced uses 1/2-20 wheel studs. The rest of the specs are: Thread size: 1/2"-20 UNF Overall length: 2.06" Knurl diameter: 0.630" Grade: 8 Finish: Zinc plated The closest option we…

view full answer...

Answer 7

I recommend using the Trailer Hub Wheel Stud item #7-122 to replace the wheel studs on your Load Rite boat trailer. These are a 1/2" diameter and 2" long.

view full answer...

Answer 8

Hey Gene, while I don't know what vehicle you have I can say that most people attach the mounting bracket for the 7-way of the #ETBC7 to the lower bumper fascia edge. That's typically the best location for it. See the attached picture to see…

view full answer...

Answer 9

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

view full answer...

Answer 10

For a Dexter 3,500 lb trailer axle hub the correct replacement wheel stud is the part #7-122.

view full answer...

Answer 11

I couldn't be 100% positive about which wheel studs you'd need without seeing the trailer and being able to measure. I just don't have enough information. This bein said, by virtue of the trailer having a 5 on 4-1/2 inch wheel bolt…

view full answer...

Answer 12

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

view full answer...

How to Find Correct Replacement Wheel Studs for Forest River Wildcat 5th Wheel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching