Solution for Extensions Not Fitting Hitch on 2024 Ineos Grenadier
Updated 11/03/2025 | Published 01/18/2025
Question:
I have a 2024 Ineos Grenadier with a factory setup to accommodate a trailer hitch. It came with a ball hitch too. I need to utilize an extension to accommodate a bike rack. Problem is that common extensions and common hitches are slightly larger than will fit. Any solutions?
asked by: Andy T
Expert Reply:
Hi Andy; what exactly do you mean by common extensions are slightly larger than will fit? Based on the vehicle I would assume it would have a 2" receiver on the hitch. Do 2" accessories not slide in correctly? If that is the case, even the shank from a bike rack would not fit.
If you could clarify that would be helpful. Industry standard receiver sizes are 1-1/4", 2", 2-1/2", and 3". If my thinking is correct, can you measure the receiver opening? It looks like these were recently imported to the US so perhaps they have a different receiver.
Product Page this Question was Asked From
RockyMounts Hitch Extender LS w/ Hitch Pin and Lock - 2" Hitches - 8" Long
- Hitch Adapter
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 8 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- RockyMounts
more information >
Continue Researching
- Shop: Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Shop: RockyMounts Hitch Extender LS w/ Hitch Pin and Lock - 2" Hitches - 8" Long
- Video: The Low-Down on the RockyMounts Hitch Extender LS w/ Hitch Pin and Lock
- Video: Feature Review RockyMounts Hitch Extender LS w/ Hitch Pin and Lock
- Search Results: hitch extension
- Shop: Kuat Hi-Lo Pro Hitch Extender - 2" Hitches - 10" Extension - 2" Rise/Drop
- Shop: Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
- Search Results: blue ox
- Search Results: hitch adapters
- Q&A: Recommended Hitch Extender Rated For 600lb Tongue Weight
- Q&A: Longer Adjustable Ball Mount Recommendation for Better Jack/Tailgate Clearance
- Q&A: Recommendation to Gain Clearance for Tailgate with Weight Distribution System Installed
- Shop: Roof Rack
- Shop: Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Shop: Blue Ox Adjustable Drop Hitch Receiver Adapter - 2" Hitches - 8" Rise/Drop - 10,000 lbs
- Shop: Ark Articulating Off-Road Coupler for 2" Receivers - Trailer Side - 2" Ball
- Q&A: No Power to the Tekonsha Primus IQ Brake Controller # TK90160 on a 2012 Chevrolet Silverado 1500
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Search Results: trailer tires and wheels
- Q&A: Recommended Flat Tow Setup for a 2026 Ford Maverick
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
on Hitch Adapter
Robin H.
11/3/2025
Hey Andy, were you able to measure the receiver opening on your Grenadier’s hitch? Once you have that size confirmed, it’ll be easier to see what extension or bike rack shank will fit correctly. Let me know what you find—I'm here if you need a hand narrowing it down.