Solution for Needing New Master Cylinder 1027100 and Damper for Titan Model 6 Actuator
Published 01/13/2025
Products Featured in This Question
Question:
Hi there, I am in need of a new master cylinder and damper for a surge actuator on my boat trailer. The m/c casting number is 1027100. I am unsure of the exact model but believe it is a Titan brand with drum brakes. I wasnt sure if it made sense to replace components needed or entire surge actuator with 2-5/16 ball. Thanks
asked by: Jeff G
Expert Reply:
Hey Jeff, we actually have the exact master cylinder you are looking for with the part # T1027100.
Since you said you need a damper too the correct replacement shock is the part # T1242600. Damper is another word for shock by the way.
For the price of these two components you are creeping into cost range that might justify replacing the entire coupler BUT these are the two most important components to an actuator and removing and installing a new one can be a bit of a chore so there's that to consider.
How's the rest of the coupler? Does it seem worth salvaging?
Jeff
1/13/2025
One more question. Is there an alternate number for the shock? I can’t seem to pull that number up on the website. Thanks
Jameson C.
1/13/2025
Product Page this Question was Asked From
Replacement Master Cylinder for Dexter Model 6 Drum Brake Actuators
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Continue Researching
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Replacement Master Cylinder for Dexter Model 6 Drum Brake Actuators
- Video: In-Depth Review of the Dexter Zinc-Plated Brake Actuator
- Search Results: replacement coupler
- Search Results: coupler
- Video: Feature Breakdown: Replacement Rear Roller for Model 6, 10, and 20 Actuators
- Q&A: Testing Shock On Titan Model 10 Actuator To Determine If Replacement Is Needed
- Q&A: How Are Roller Bearing Installed When Replacing Shock For Titan 6 Or 10 Brake Actuators
- Q&A: How the Shock Absorber Works on a Surge Brake Actuator
- Shop: Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators - Drum
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
- Search Results: titan model 6 actuator
- Q&A: Recommended Guide-Ons That Stick Out 24 Inches From Either Side Of Trailer
- Q&A: Availability Of Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators - Disc
- Q&A: Do I Clean Or Replace The Master Cylinder on a Titan Model 6 Actuator That is Full of Rust?
- Q&A: Solution for Jerking Brake Application of Titan Model 6 Actuator
- Shop: Master Cylinder Rebuild Kit for Demco Kar Kaddy 3 with Drum Brakes and Demco Drum Brake Actuator
- Search Results: boat trailer side bunks
- Shop: Replacement Rear Roller for Model 6, 10, and 20 Actuators - Qty 1
- Search Results: dexter model 6
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Article: Best Boat Trailer Jacks
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Video: Complete Breakdown of the Bearing for Dexter Model 6 Actuator
- Article: Boat Trailer Guides: Which are the Best?
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Video: Hands-On with the Replacement Master Pin for Dexter Model 6 Brake Actuator
- Video: Replacement Damper Pin for Dexter Model 6 Brake Actuator Spec Review
Jeff
1/13/2025
Thanks Jameson. The coupler is in great shape otherwise. The trailer just sat a lot with the previous owner. I think I’ll go the repair route and get everything ordered up. Thanks again