bing tracking image
Q & A Icon

Replacement Locking Handles For A B&W Companion OEM Base  

Updated 11/17/2025 | Published 12/05/2024

Question:

I have BW slider hitch for ford f250 fzz as factory puck system. I need a replacement handle for driver side hitch. Someone drilled out the hole for pin to keep it from rotating. I’d like to replace it. Either one or both handles. Thanks

0

Expert Reply:

Hey Jerry,

If you're referring to the locking handles (pictured below) that mount the B&W Companion OEM Slider Base # BWRVK3370 into your F-250's puck system you'll need to reach out to B&W and have the serial number for your hitch ready since they want document these replacements. The serial number is on the large orange sticker on the cab side of the hitch in the middle at the bottom. They don't offer these as to distributors so going through them is the only way to get more of these.

expert reply by:
0
Kevin C
Heather A. profile picture

Heather A.

11/17/2025

Hey Jerry, were you able to get the replacement handle from B&W using your hitch’s serial number? Knowing what worked could help others who need the same part for their Companion slider.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>