Replacement Hub and Drum for 3,500 lb Standard Duty Timbren Axle-Less
Updated 11/17/2025 | Published 11/30/2024
Products Featured in This Question
Question:
I have a miss match I brake drums….i bought a timbre 3,500 from you…please suggest a number of 10inchx2 1/4 454 drum kits include Dexter please
asked by: Frank B
Expert Reply:
Hi Frank; what you have are the Timbren # ASR3500S05 which use the standard bearing combination for 3,500 lb axles. You previously ordered the etrailer # AKHD-545-35-G-EZ-K and Dexter # 84546UC3-EZ. Both of these will still work. The # AKHD-545-35-EZ-K you looked at will also work as a replacement. If you want a Dexter option that is not pre-greased you can use the # 84546UC3.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Replacement 10" Electric Brakes For A 2019 nuCamp T@G Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Hub For Lippert 3,000 lb Axle
- Q&A: Replacement Hub and Drum Kit for a Lippert 3,500 lb Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Most Popular Wheel Bearings
Robin H.
11/17/2025
Hey Frank, how did things go with the hub and drum options for your Timbren axle? Were you able to match everything up with the Dexter or etrailer assemblies? Your update could make it easier for the next person working with the same setup.