Replacement Manual Override Crank Handle For An Atwood 3000 Premier Electric Trailer Jack

Updated 11/11/2024 | Published 11/03/2024

Question:

I am looking for a manual crank handle for my Atwood, 3000 Premier electric trailer hitch jack can you help me?

asked by: Bruce N

Expert Reply:

Hey Bruce,

Atwood has pretty much been completely phased out at this point so you most likely will not be able to find a manual crank for your Atwood jack. You can typically make your own crank though depending on the connection point for the manual override. I can see that there were two styles of crank handles for these jacks but no actual pictures of the connection point. Is yours just a nut to turn or do you have a slotted fitting? If you want to send me some pictures I can see if we have anything close enough to work.

expert reply by: Kevin C

Bruce N.

11/9/2024

Thanks Kevin for the info.I’ll have to check some things. Appreciate your help. If I get another electric jack , what would be a well built reliable one?

Kevin C.

11/11/2024

@BruceN I typically recommend our etrailer branded electric jacks. The issues we typically run into with them are that a switch broke or cap was lost instead of the jack malfunctioning and needing to be completely replaced. A lot of the brands available won't offer replacement parts which means you're stuck purchasing a whole new jack. I recommend going with the # EJ-3520-WBX (white) or # EJ-3520-BBX (black) and then protecting the head from the weather with a cover # UF38-944020.