Gooseneck Hitch Ball For 2014 Ram 2500 With OEM Prep Package

Question

Question:

Also, is this BW93FR the correct product for a 2014 RAM 2500 crew cab laramie long bed. It looks to already have the Prep package under the bed. TIA

asked by: Michael D

0

Expert Reply:

Hi Michael,

If your 2014 Ram 2500 already has the OEM 5th wheel/gooseneck prep package, you wouldn't use the Center Section for B&W Turnoverball Underbed Gooseneck # BW93FR because everything is already set up and ready to go. You'd just need the B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch # BWGNXA2062.

expert reply by: Kyle S

0

Mike

11/4/2024

Then I'm wrong when I said Prep package. It would have come with the puck set up, but it's not installed.

Kyle S.

11/4/2024

@Mike So the OEM puck set up is not something that is available aftermarket; I assume you have some type of gooseneck brackets already and are looking for the center section? If that's the case, I would have to know the exact manufacturer and model number of those brackets to get you a matching part (as you can't mix and match them because they won't line up). The other option is to completely replace your set up with a new gooseneck hitch, and I'll link the fits for your truck if you'd like to go that route.

Helpful Links

g-2014_ram_2500.htm?style=8+foot+bed+without+oem+prep+pkg

Answer 1

Hey Allison, we have a way to install a B and W Turnoverball gooseneck hitch but not using the #BW93FR. Instead you would want the part #BWGNRK1116 which is a complete kit to install a gooseneck in your truck. You wouldn't need any additional…

view full answer...

Answer 2

Yes, it is Sam. For just the universal brackets you'll need the Reese Universal Installation Kit for 5th Wheel Trailer Hitches (No Base Rails) - 10 Bolt item #RP30439. This kit works with the Reese Universal Base Rails item #RP58058. What brand…

view full answer...

Answer 3

No, it will not Adam. For a 2019 Ford F-250, you'll need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item #BWGNRK1116. This hitch is custom fit and includes all hardware necessary to complete installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Gooseneck Hitch Ball For 2014 Ram 2500 With OEM Prep Package

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching