Trailer Hitch Fitment For The 2024 Toyota Corolla Cross Hybrid

Updated 10/31/2024 | Published 10/30/2024

Products Featured in This Question

EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"

(3)

$427.24

Torque Wrench with Storage Case - 3/8" Drive - 100 ft/lbs of Torque

(7)

$69.58

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(1)

$103.56

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(6)

$70.75

Question:

Can this hitch be installed on a 2024 Toyota Corolla Cross Hybrid without removing the rear bumper and rear taillights? It is a bolt-on assembly that a person could do with basic tools?

asked by: Paul R

Expert Reply:

Hey Paul,

The EcoHitch Hidden Trailer Hitch Receiver # EH87CR would not require you to remove the rear bumper or tail lights and would be a bolt-on installation. It does require you to notch out a hole in the rear fascia for the receiver tube to stick out. This can mostly be done with basic tools but you'll want a razor blade scraper to remove some sealer from the frame and you'll also need a torque wrench # PT87ZR to torque down the mounting hardware.

If you plan on towing a trailer or adding lights to a bike rack or cargo carrier then you'll want the Tekonsha # TK24CR (LED tail lights) or # TK25VR (non-LED tail lights). These harnesses would require you to pop out the tail lights and have t-connectors that you'll just plug in-line with the factory tail light wiring. You would also need to run a power wire from the harness up to the battery, routing it away from any moving parts or ones that generate heat.

expert reply by: Kevin C