Recommended TorkLift Tie-Downs For a 2017 Ford F-350 Super Duty SRW w/ Extended Running Boards

Question

Question:

My 2017 F350 SRW has extended running boards. Will that interfere with the installation?

asked by: Franklin B

0

Expert Reply:

Hey Franklin. So long as the running boards on your 2017 Ford F-350 don't run wheel to wheel then the TorkLift Tie Downs - Custom Frame Mount item # TL54VV will work for you. If they stop at the back of your cab you'll be good. These fit the longer 8' bed F-350's.

expert reply by: Jerred H

0

Jerred H.

12/22/2025

Hey Franklin, how did things turn out with the TorkLift tie downs on your F-350 and those extended running boards? It’d be great to know if the fit worked as expected. Your update could make it easier for the next person with the same setup.

Answer 1

Hello David, Congrats on the new Lance in bed camper! For your 2020 Ford F-350 Super Duty with 8 foot bed and factory installed hitch you are going to want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL54VV. For the turn buckles for…

view full answer...

Answer 2

Hey Jason, thanks for reaching out! We have a TorkLift tie-down kit for your 2022 Ford F-350 just as long as the electric running boards aren't wheel-to-wheel (I don't believe they are). The kit you referenced is for newer Super Duty pickups,…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Recommended TorkLift Tie-Downs For a 2017 Ford F-350 Super Duty SRW w/ Extended Running Boards

Featured Help Information

Miscellaneous Media

Continue Researching