Will etrailer Cargo Carrier Fit KZ Sportsmen SE 261BHKSE

Question

Question:

I have a k-z 261BHKSE Will the mounting bracket fit on the back bumper and actually be able to fold up?

asked by: Cj

0

Expert Reply:

Hello Cj; the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 is designed to fit 4" tall x 4" wide and 4-1/2" tall x 4" wide RV bumpers. We don't have a way of knowing what size bumper you have so you will need to measure to see if it fits. It is 40" wide so I would also measure to see if you have enough open space on the back for it to fold up. The only thing that would really get in the way is the ladder or the spare tire assuming you have those on the rear.

expert reply by: Robin H

0

Robin H.

12/22/2025

Hey Cj, were you able to measure your bumper and check if the cargo carrier fits and folds up on your K-Z 261BHKSE? Knowing how much clearance you had around the ladder or spare tire could help others with a similar setup.

Answer 1

Due to the bumper being partially recessed under the RV, you wouldn't be able to attach the #e99050 cargo carrier as you wouldn't be able to slip the mounting brackets onto the bumper from above. This being said, we do offer a solution that…

view full answer...

Answer 2

Hi Keith, So I looked and couldn't find a good photo showing the bumper of your Forest River trailer. Is it totally recessed under the bumper, is it even with the back of your trailer, or does it stick out a bit? If it sticks out at all or is…

view full answer...

Answer 3

Hey Sara, the widest bumper the etrailer folding cargo carrier part #e99049 can fit is 4-1/2 inches. The only way it could attach to your bumper would be cut off the back of the bracket and then weld the front L of it directly to your bumper.

view full answer...

Answer 4

Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…

view full answer...

Answer 5

Hey Scott, thanks for the information! I don't have anything that's going to connect to the rear view mirrors but I do have a system with side view cameras. It's the Furrion Vision S+ Wireless RV Observation System w/ 3 Cameras - 7"…

view full answer...

Answer 6

I was able to find a document with Reese which shows the Head #RP58167 having the PAT Pending NO. 5375867. This is compatible with the Shank #RP54970 you found. As for the trunnion bars, the part 54946 relates to the end of the trunnion bar that…

view full answer...

Answer 7

Not for the tongue no. The Stromberg Carlson Trailer Tray Cargo Carrier item #CC-255 is the largest one we have. It measures 32" long x 20" wide. The only option I have to transport a 23.7" long x 23" wide generator is to use a…

view full answer...

Answer 8

Hi Ron; looking at pictures you have the right kind of bumper on the rear of your 2023 Entegra Vision 29S. However, I would go ahead and measure it just to make sure the 24x84 etrailer Cargo Carrier #e96ZR will fit. This is designed to for 4" x…

view full answer...

Answer 9

Hey Dennis, typically we recommend the Mount N Lock Safety Struts part #MO22FR to help brace up the rear of the camper to use the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 that you referenced. What are you planning on carrying with this…

view full answer...

Will etrailer Cargo Carrier Fit KZ Sportsmen SE 261BHKSE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching