Can I Use the Curt Clevis Pin w/ Handle and Clip C45805 on the B&W Patriot 5th Wheel Hitch?
Updated 12/22/2025 | Published 09/29/2024
Products Featured in This Question
Question:
Hello. I have a Ram 3500 with an 18K Patriot BW fifth wheel set up towing a 10K fifth wheel. Can I use the longer clevis pin C45805. I find the stock pins are a total pain to put in and a longer pin would help. I also think having the clip go through the pin is a safer set up. I havent been able to locate any info regarding using these pins to hold the Fifth wheel in place and dont see any ratings. Probably overthinking it. Thanks. Don
asked by: Don
Expert Reply:
No, you wouldn't want to do that Don. The Curt Clevis Pin with Handle and Clip item # C45805 is not designed for that purpose. You would want to stick with the stock pins that come with the B&W Patriot 5th Wheel Trailer Hitch item # BWRVK3255 or item # BWRVK3270 if you have the slider.
Product Page this Question was Asked From
Curt Clevis Pin with Handle and Clip - Steel - 3-5/8" Long x 1/2" Diameter
- Hitch Pins and Clips
- Clevis Pin
- 6-7/8 Inch Long
- 1/2 Inch Diameter
- 6-7/8 Inch Span
- CURT
more information >
Continue Researching
- Search Results: patriot 18k slider
- Shop: Fifth Wheel Hitch
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Search Results: lippert turning point pin box
- Q&A: Formula Used for Determining if Fifth Wheel Truck and Trailer will have Turning Clearance
- Q&A: Can I Use a Longer Pin Box on My 5th Wheel Trailer and B&W Hitch
- Q&A: Can The B&W 5th Wheels Rails Be Used With Curt Frame Brackets?
- Q&A: Pin and Clip Needed to Install B&W Patriot in 2015 Ford F-250 Super Duty
- Q&A: Recommended B&W 5th Wheel Hitch for 2019 Ford F-250 4WD with 6-3/4 Foot Bed
- Shop: MORryde Cushioned 5th Wheel Pin Box for 11K to 14K Trailers w/ Lippert Rhino
- Shop: MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino
- Q&A: Will MORryde Custioned Pin Box For Lippert Rhino Pin Box Add Length
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Search Results: trailer wiring
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
- Shop: Gooseneck Hitch
on Hitch Pins and Clips
Jerred H.
12/22/2025
Hey Don, how are things going with the stock pins on your B&W Patriot hitch? Were they any easier to work with after sticking with the original setup? Your experience could help others looking for a smoother pin fit.