What is the Weight of the 16" Aluminum Jaguar Trailer Wheel

Question

Question:

How much does this wheel weigh

asked by: Byron

0

Expert Reply:

Hey Byron, good to hear from you again!

The 16" Aluminum Jaguar Trailer Wheel # 274-000011 weighs in at 17-1/2 lbs.

expert reply by: Jon G

0

Jesse M.

1/27/2026

Hey Byron, did the 17-1/2 lb weight of the aluminum Jaguar wheel work out for your setup? Knowing how it balanced out could help others choosing the same wheel.

Answer 1

The Aluminum Jaguar Wheel #274-000011 does not have a PSI rating, but it's included valve stem does and is rated to 80 PSI. If the tire you're installing requires more air pressure then that, you'll just need to replace the included valve…

view full answer...

Answer 2

Yes, the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP85FR is designed to work with a 2-5/16" hitch ball. A better way to determine the clearance between the bed rails and pin box, is to install the pin box and adjust…

view full answer...

Answer 3

I spoke to my contact at Lippert (LCI) and they informed me that you have a Lippert 1621 Pin Box. Therefore, the correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter for you is part #RP85FR.

view full answer...

Answer 4

Yes, the Dexter axle part #8327816 that you referenced has the exact same spindle as a Lippert 5,200 lb axle so the hubs and bearings would interchange.

view full answer...

Answer 5

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 6

Yes, all of the hub/drum and brake assembly components of a Lippert 5,200 lb axle are exact same as Dexter 5,200 lb axle. This includes the hub/drum part #AKHD-655-6-EZ-K that you referenced as well as matching assemblies part #AKEBRK-6.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

What is the Weight of the 16" Aluminum Jaguar Trailer Wheel

Featured Help Information

Miscellaneous Media

Continue Researching