What Hub and Drums are Designed to Work with the Brake Shoes part # bp04-065

Published 05/20/2014

Question:

Hi there, I would like to order 4 sets of part #bp04-065. Could you tell me what drum I would order with these pads .Also if I ordered the drum do they come with bearings and back seal. If not can you tell me the price of everything. Thank -you.

asked by: Harold D

Expert Reply:

Dexter hub and drum assemblies designed for 10 inch assemblies are designed to work with the Brake Shoes part # bp04-065. In order to determine which replacement hub and drum you would need to match what is on your trailer, you will need to either get the numbers that are stamped on your bearings, or you will need to get some precise measurements from your spindle.

The measurements you need will be where the seal and bearings ride. Check out the picture I attached to see which measurements are needed.

Once you have that information you will know what spindle you have, from there you will need to find a hub and drum that has a 10 inch drum to match the brake shoes part # bp04-065 and matches your current wheel bolt pattern. I attached an FAQ on how to determine bolt pattern.

expert reply by: Jameson C