Trailer Hitch for 2025 Genesis GV80

Question

Question:

Hello - We need a trailer hitch for a 2025 Genesis GV80 - would this be the same hitch that works with a 2024? Only need it for a bike rack... Thank you Joe Givan

asked by: Joe G

0

Expert Reply:

Hi Joe; I just checked with the manufacturers and it looks like the hitches we have for the 2024 also fit the 2025 Genesis GV80. If you just want a standard hitch I recommend the etrailer # e65KR. If you want a hitch with a removable receiver for a completely hidden design we also have the Stealth Hitches # SH99GR.

expert reply by: Robin H

0

John H.

11/19/2024

I’m in the process of getting a 2025 Genesis GV80 “Coupe.” I believe the only difference between the GV 80 and the GV 80 Coupe appears to be the slope of the roof which is on the same chassis. This car does have a quad exhaust which is the real question here. I need to confirm that the connection process to the frame is the same? Thanks!

Robin H.

11/20/2024

@JohnH the installation will be the same aside from the fact that you will need to lower the exhaust on both sides.

Answer 1

Hey Mike! We do not have an installation video for the Stealth Hitches #SH99GR at this time. We rely on customers to bring in vehicles for installation so until we see a Genesis GV80 we won't be able to make a video. However, I did attach the…

view full answer...

Answer 2

Yes, we do! To install a Stealth Hitch on a 2024 Genesis GV80 you will need item #SH99GR. This hitch is custom fit and bolts to your Genesis with included hardware. It has a maximum tongue weight capacity of 600 lbs. So it would be great for a bike…

view full answer...

Answer 3

I would be happy to! To add a hitch to your 2024 Genesis GV80, I recommend the etrailer item #e65KR. This hitch is custom fit and bolts to your Genesis with included hardware. I really like the etrailer Hitch because the crosstube mounts behind your…

view full answer...

Answer 4

Hey Joe! Yes, the receiver from the Stealth Hitches Hidden Rack Receiver #SH99GR will be nice and snug so you won't see your bike rack bouncing around behind your 2022 Genesis GV80. I'm guessing the reason it's rated as a 10 out of 10 is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...