Upgraded Equalizer for 2014 Winnebago 2351DKS
Updated 08/16/2024 | Published 08/06/2024
Products Featured in This Question
Question:
I have a 2014 Winnebago 2351DKS and would like to upgrade the suspension. The wheelbase is 29 3/4inch and the equalizer is 5 3/4inch center to center. Would the Cre3000 upgrade work?
asked by: Jeff
Expert Reply:
Hi Jeff; the MORryde # MR87ZR won't be a good fit since it measures 6-1/2" on center. When you upgrade the equalizer you want to use one that matches your current measurement if possible. This keeps your geometry suspension the same so you won't end up with problems instead of a nice upgrade. Also, you won't really notice a difference between brands so matching the equalizer size is the most important factor when choosing one.
Based on your measurements I recommend the Dexter E-Z Flex Suspension Kit # K71-652-00. The distance between the outer shackle bolt holes on the Dexter is 5-3/4" just like what you have now. The kit also includes 1/2" thick shackle straps, bronze bushings, and wet bolts for a complete upgrade.
I went ahead and attached a video below where Kevin installed these on my Jayco for your reference.
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: morryde trailer suspension parts
- Search Results: supersprings intl trailer suspension parts
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Search Results: 3500 lbs trailer axles
- Video: Detailed Breakdown of the MORryde Rubber Equalizers for Tandem Axle Trailers
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Shop: RV Covers
- Search Results: nylon bushings
- Search Results: vent fan
- Search Results: joy rider rv shock kit
- Search Results: nylon bushings trailer leaf springs
- Q&A: What Is The Best Suspension Upgrade Available For Winnebago 2455BHS Travel Trailer?
- Shop: RV Camera
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle
- Q&A: Comparing Effects of Tandem Axle Shock Kits vs. Cushioned Equalizers Travel Trailer
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5K to 8K - Greasable Pivot
- Shop: Trailer Hitch
- Shop: Blind Spot Detection
- Video: Breaking Down the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers
- Q&A: Will MORryde Equalizers MR87ZR Replace 5-3/4" Equalizer On Travel Trailer?
- Q&A: Timken Bearings, Races, Seals and Caps For a Lippert 3,500lb Trailer Axle
- Q&A: Does The Dexstar Steel Spoke Trailer Wheel DEX54FR Have A max PSI Rating?
- Q&A: Replacement Bushing Options for Lippert Never Fail Bushings
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
Jeff
8/15/2024
Robin, I looked at the Dexter equalizer but it said up to a 6000# axle. I have tandem 3500# axles, totaling 7000#. When it says 6000#, is that per axle or a total of 6000#? The total loaded weight of the RV is 7600#.