Replacement Hub for ShoreLand'r SLR31BLW

Updated 08/06/2024 | Published 08/04/2024

Products Featured in This Question

Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs

(55)

$149.94

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2941)

$16.94

Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs

(73)

$490.79

Question:

What size hub kit and bearings do I need for my SLR31BLW shore lander trailer?

asked by: Steve B

Expert Reply:

Hi Steve; based on my research it looks like you have a 3,500 lb axle and it came with a hub/rotor for UFP disk brakes. We don't have an exact parts list so I recommend verifying this information to be sure. You can check your axle tag for a serial number or pull your hubs and bearings to identify them. Assuming that is correct, you can use the Dexter 10" Hub-and-Rotor Assembly # K08-435-05 you were looking at as a replacement. You will also need the # BK2-100 bearing kit.

I have attached a picture below of the UFP calipers this rotor is compatible with according to Dexter. If this matches your current caliper style it will work as a replacement. If not, you may need a complete replacement like the # T2HRCM10DAC. Depending on the age of the trailer/brakes a full replacement might not be a bad idea one way or another.

expert reply by: Robin H