Which Gen-Y Fifth Wheel to Gooseneck Adapter Fits Brinkley 3610

Question

Question:

I am looking at the Gen Y hitch for my Brinkley 3610.. can you please confirm the correct model for me.

asked by: Ryan A

0

Expert Reply:

Hey Ryan, since in the past we have determined that your Brinkley 3610 has a Lippert Rhino Box pin box the correct Gen-Y fifth wheel to gooseneck adapter would be the part # GY98GR. If you were looking for a cushioned pin box instead you'd need the # GY86GR.

expert reply by: Jameson C

0

Jameson C.

2/3/2026

Hey Ryan, how did things work out with the Gen-Y adapter for your Brinkley 3610? Your update could make it easier for the next person trying to match their Rhino Box setup.

Answer 1

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 2

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 3

Hey Greg, yes, I can definitely help with that. The head and the base of the Demco Autoslide 5th Wheel Hitch #DM79GV can be separated. The head weighs about 60 lbs by itself. The base by itself is about 185 lbs. The side plates (which can also be…

view full answer...

Answer 4

The total weight of the Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 that you referenced is 289 lbs. It comes apart in a few pieces pretty easily to make assembly and disassembly easier.

view full answer...

Answer 5

The gears of the 21k Demco Hijacker #DM8550035 are a bit heavier duty than the 18k capacity version #DM8550034 to allow it to have a higher capacity. The lighter duty hitch weighs 276 lbs and the heavier duty version weighs 308 lbs. To install this…

view full answer...

Answer 6

In regards to a sliding fifth wheel hitch like the B&W Companion OEM 5th Wheel Trailer Hitch part #BWRVK3370, you can't tow with the hitch slide back away from the cab, this is only used for slow speed turning maneuvers. It would honestly…

view full answer...

Answer 7

Congrats on the new 2020 Ford F-350 Super Duty purchase! I'd be more than happy to help you figure out which base rail kit option is best for your lifestyle. The first difference between above bed and under bed kits lies in the name. Above bed…

view full answer...

Answer 8

The Demco Hijacker Autoslide fifth wheel hitch part #DM8550024 that you referenced weighs 304 lbs.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Which Gen-Y Fifth Wheel to Gooseneck Adapter Fits Brinkley 3610

Continue Researching