Looking For Replacement Hub And Drivers Side Brake Assembly For 2020 Rockwood Mini-Lite 2509S
Updated 02/03/2026 | Published 07/17/2024
Products Featured in This Question
Question:
Hi, Looking for some help finding a hub assembly and self adjusting brake assembly driver side for my 2020 rockwood mini-lite 2509s. It has the Dexter Ez lube axels with the Nev-r adjust brakes, 14 inch tires.
asked by: David
Helpful Expert Reply:
Hello David. I can definitely point you in the right direction of a new hub and brake assembly for your Rockwood camper. I do not have a way to look up your camper to know exactly what parts you will need though, so we will need to gather and confirm a bit more info.
The most helpful thing to know is the weight capacity of the axle. Knowing that will tell me exactly what size brake assembly you will need, and it will help tremendously to narrow down the correct hub.
For example, what we see most commonly on campers like yours are 3,500 lb axles. These will use the standard 10" x 2-1/4" brake assembly. If this is what you have, the correct Dexter Nev-R-Adjust brake assembly for the driver side is part # 23-468.
For the hubs, the 3,500 lb axles use standard bearing sizes, those being the # L68149 (1.378" inner diameter) inner bearing and the # L44649 (1.063" inner diameter) outer bearing. If this is indeed what you have, I recommend the hub part # AKHD-545-35-EZ-K. This hub comes pre greased with bearings. It has the 5 on 4-1/2" bolt pattern which is standard.
If you do not have a 3,500 lb axle just let me know in the comments below and I am happy to make a recommendation.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: What Size Wet Bolts Come with MORryde Suspension Upgrade Kit # MR46ZR
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
Jesse M.
2/3/2026
Hey David, did you get a chance to check the weight rating on your Rockwood’s Dexter axles? Once you confirmed that, were the 3,500‑lb Nev‑R‑Adjust brakes and matching hub a good fit? Your update could make it easier for others working on similar campers.