bing tracking image
Q & A Icon

Troubleshooting An E8 Error On A Fogatti Tankless Water Heater  

Updated 07/15/2026 | Published 07/16/2024

Question:

Hi, I’m getting a E8 code on my FOGATTI tankless water heater model # FS08B1SA. What steps should I take to diagnose it? The unit is 3 months old and only used for 2 separate trips.

0

Expert Reply:

Hey Michael,

An E8 error code means you have a wind pressure switch failure. When the power is turned on for 5 seconds, the wind pressure switch is closed or the wind pressure is continuously disconnected for 2 seconds. There isn't much you can do besides check the exhaust tube to see if it's clogged or see if the sensor has a loose connection. I recommend reaching out to Fogatti for a warranty replacement.

expert reply by:
0
Kevin C
Wind Pressure Sensor
Wind Pressure Sensor
(click to enlarge)
Robin H. profile picture
Etrailer Expert

Robin H.

2/3/2026

Hey Michael, were you able to get the E8 error on your Fogatti water heater resolved after checking the exhaust tube and sensor connections? Knowing what fixed it could help others who see the same code on their units.

J.c. profile picture

J.c.

7/15/2026

Is it difficult to access the sensor to check the connection? I’m getting the E8 also and only glanced into the area as I was checking for a vent blockage. It got dark before I could dig much deeper. I’ll be able to do a little more in depth searching tomorrow morning.

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/15/2026

@Jc It shouldn't be too bad. I would recommend having the above diagram on you and you'll find it no problem.

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching