Is Loctite Needed When Assembling Yakima Rack and Roll Trailer

Question

Question:

I have ordered the Yakima RandR 66 trailer Y08106, which I know will have to be assembled. Do you recommend using liquid thread locker e.g. Locktite on the screw threads?

asked by: James O

0

Expert Reply:

Hey James,

That's a good question, but as long as you torque everything down correctly (the install manual will call out specific torque ratings), using Loctite or another thread locker really isn't necessary. I actually don't recommend doing this because it could make any potential maintenance down the line a pretty frustrating experience.

expert reply by: Chris R

0

Chris R.

2/3/2026

Hey James, how did the assembly of your Yakima Rack and Roll 66 trailer go without using thread locker? Your update could make it easier for others putting theirs together too.

James O.

2/4/2026

@ChrisR Assembly of the Yakima R&R 66 went great. No issues during assembly, no issues during regular use since that time. I still have it and look forward to using it this next year when things warm up.

Chris R.

2/4/2026

@JamesO That's great to hear! And yes, I am quite ready for spring. Hard to kayak on ice.

Answer 1

According to Yakima, the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 should only be used if you add the 78" crossmember kit #Y08111. They didn't have an exact reason for this, but it sounds like the concern is people will…

view full answer...

Answer 2

The Yakima Rack and Roll Trailer - 66" #Y08106 or 78" #Y08107 ride very well at highway speeds on long trips. These 16 inch wheels work very well at any posted highway speed in favorable conditions. Just like any trailer, you want to slow…

view full answer...

Answer 3

I took a look at the Yakima Rack and Roll #Y08106 that you're inquiring about, and it turns out you can actually stand this kayak up completely like you're wanting too. You are just going to have to remove the wheels and the tongue, which is…

view full answer...

Answer 4

I spoke to my contact at Yakima and she informed me that since your kayaks will be behind your vehicle and not on top it is not as important to have the kayaks strapped down when used on the Yakima Rack and Roll Trailer #Y08106. She did recommend…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Is Loctite Needed When Assembling Yakima Rack and Roll Trailer

Continue Researching