What Reese Goose Box For 12,200 lb Trailer With Lippert 1621 Pin Box

Question

Question:

Which Reese gooseneck box should I put on my 4th wheel,,,GVWR is 12,200 with a pin box 1621

asked by: Tom Z

0

Expert Reply:

Hi Tom,

For your trailer with a Lippert 1621 pin box, since it is lightweight with just a 12,200 lb GVWR, the right Goose Box is the 16,000 lb capacity Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP94716.

expert reply by: Kyle S

0

Tom

7/5/2024

But will a 20,000 work for.me

Kyle S.

7/8/2024

@Tom Absolutely yes; you can use the 20,000 lb Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP85FR.

Answer 1

To give you the correct selection to choose from I have to know what pin box you have on your 2010 Keystone Cougar 326MKS. This is needed as not every RV is going to always have the same components even if they were built the same day in the same…

view full answer...

Answer 2

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 3

I was able to determine from your picture of the frame tag you have a 1621 pin box bolt pattern on your 2020 Keystone Cougar 29RKS. You will need the 16K Reese Goose Box #RP94716 and a set of Safety Chains #49150.

view full answer...

Answer 4

The main reason that RV's use 5th wheel hitches is they provide a smoother ride than gooseneck hitches. Since RV's generally carry fragile components like TV's and dishware as well as having decorative trim and glass lighting fixtures…

view full answer...

Answer 5

Hi Don, Since you have a 1621 bolt pattern the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716 would be the correct fit for your 2024 Forest River Sabre 34FLX. I've attached a short video below where Dave will walk you…

view full answer...

Answer 6

Hey Brian, Based on the numbers you provided your trailer has a 1621 pin box bolt pattern and would need the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716. Since you have the factory puck system I recommend the B&W Ball…

view full answer...

Answer 7

Hey Mark, So Bud is correct but the Reese Goose Box #RP94716 is designed with a gas shock and air spring to provide a more comfortable ride. If it were a standard gooseneck hitch without any cushioning then yes, you would have ride quality issues.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What Reese Goose Box For 12,200 lb Trailer With Lippert 1621 Pin Box

Continue Researching