Replacement Control Panel For An Atwood GC6AA-10E RV Water Heater

Updated 06/07/2024 | Published 06/02/2024

Products Featured in This Question

Replacement Control Panel for Atwood Water Heaters

(63)

$180.23

LaSalle Bristol XTRM Universal Non-Sag Sealant for RVs - White - 10.1 oz - Qty 1

(76)

$29.89

Alpha Systems Butyl Tape for RV Weatherproofing - 20' x 1" x 3/16"

(224)

$25.41

Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 18" Door

(382)

$818.90

Question:

Good day, my circuit board on my rv water heater Atwood GC6AA-10E with another number 93809 needs to be replace and I’m not sure which one I need to buy. Thanks

asked by: Guy B

Expert Reply:

Hey Guy,

The correct replacement control panel for your Atwood GC6AA-10E is part number 91365. We unfortunately no longer carry this part since it's been discontinued but you can check to see if anyone else might still have one. If not then you'll have to replace the entire water heater.

To replace this unit you'll want the Furrion RV Tankless Water Heater - 16" x 18" Door # FR48SR. This unit is tankless so you won't have wait for the tank to heat up or deal with the tank lining corroding and needing to be replaced. The # FR48SR is able to produce 144 gallons of hot water per hour so you'll be able to take a shower and do the dishes without having to wait.

This unit is going to be a bit smaller so you'll need to frame it in with some 2x2's like Jake did in the attached video below. You'll also want some butyl tape # AL28FJ for the mounting flanges of the unit and access door as well as some non-sag sealant # 344270341437-1 for around the access door to prevent any water from leaking into the wall.