Recommended Drum to Disc Brake Conversion for a 2004 EZ Loader Boat Trailer

Updated 06/05/2024 | Published 05/30/2024

Products Featured in This Question

Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs

(93)

$537.29

Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi

(244)

$1145.37

Question:

I have 2004 ex loader galvanized boat trailer with drum brakes. I have replaced the drum brakes several times and would like to put on a brake system that last longer in saltwater use. I was looking at drum to disc conversion, easier to clean and maintain hopefully after a saltwater dip. I would appreciate any information you can offer. I assume I am looking for a complete kit from the brake controller, new lines, and the entire brake assembly. Thank you, David

asked by: David L

Expert Reply:

Hey David, great idea to make the switch. So to start you're going to need the Kodiak Disc Brake Kit # K2HR35D, which will work with 3,500 lb axles, has a Dacromet coating for superior corrosion resistance for freshwater or saltwater, and will work with 13" or larger wheels.

Next, you're going to need a new actuator which you can use the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes # HBA16-252-82. This includes the breakaway kit, brake lines, and a built in bleeder which lets you easily flush the air out of your brakes.

Finally, you'll need a brake controller like the Tekonsha Prodigy P3 # 90195 which can work with up to 4 axles, has an easy to read LED screen, and an automatic leveler which will let you put it at any angle for install.

expert reply by: Bryce D