Which Bearing Buddy Fits a Malone Megasport Trailer

Question

Question:

Hello, I hope all is well. I have a Malone Megasport trailer and would love to add Bearing Buddy barring protectors to it. I’m not sure what the proper size would be. Would you be able to advise? Thank you, Dale

asked by: Dale J

0

Expert Reply:

Hey Dale, things are pretty good here in etrailer land. The correct Bearing Buddy for a Malone trailer is the part # BB1980A. This size fits a hub bore that measures 1.980 inches.

expert reply by: Jameson C

0

Dale J.

5/28/2024

Thank you, I really appreciate the help. I've ordered a set and looking forward to installing them. Thank you again, Dale

Answer 1

The Malone MicroSport Trailer #MPG460G does have the 1.98 inch inner diameter hub. I confirmed this with the manufacturer. To add bearing buddies, you simply need the #BB1980A for chrome or #BB1980A-SS for stainless steel. You will not need to…

view full answer...

Answer 2

We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer #MPG460G. What you will need is the following: - Bearing Kit #BK1-100 - Grease Cap #F001518 - LubriPlate Poly HP-2 Wheel…

view full answer...

Answer 3

We have a Malone MegaSport Kayak Trailer - 86" Crossbars - 14' Long - 1000 lbs Item #MPG535 that we use for demos so I went out and measured the grease cap to determine the correct size needed. It takes a 1.98 inch standard grease cap. For a…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

Hey Howard! Yes, I think the Replacement Inner Member for Dexter DX7.5L Brake Actuator #DX97FR will replace what you have. It has the same body, just a different coupler on the end, so it will line up in the old housing. If you want to save some…

view full answer...

Answer 6

Hey Justin, welcome back! The 136" measurement on the Parking Brake Kit #T2385201 is the overall length of the rear cable. It runs back roughly half that length on each side from where it runs through that central bracket. What kind of trailer…

view full answer...

Answer 7

Hey it sounds like you are on the right track here, Blake. The Kodiak Disc Brake Caliper #KDBC225DAC is exactly what we recommend for replacing the Tie Down 46304 calipers. We have confirmed on multiple occasions that the Kodiak caliper is a suitable…

view full answer...

Answer 8

Hey Stephen, yes you can use a multipurpose lithium grease in your Dexter axle hubs like the part #DX64TR as that's actually the grease that Dexter recommends in their hubs. We also haev this grease in a 1 lb tub with the part #DX37VC as well.

view full answer...

Answer 9

Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…

view full answer...

Answer 10

The model 1980 Bearing Buddy simply means that they fit a 1.980 inch hub bore. There is one difference of note between Bearing Buddy Bearing Protectors #BB1980A (Chrome Plated) or #BB1980A-SS (Stainless Steel) and the Bearing Buddy Bearing Protectors…

view full answer...

Answer 11

Hey David, welcome back, and thanks for providing all those details about your axle, it really helps. We do carry the hub you need for your Dexter 4,400 lb axle. For that you'll need the following: - Trailer Hub and Drum Assembly - 4,400-lb E-Z…

view full answer...

Which Bearing Buddy Fits a Malone Megasport Trailer

Product Page this Question was Asked From

Continue Researching