Replacement Hub And Bearing Kit For A Loadrite WV2200L Double Jetski Trailer
Updated 05/30/2024 | Published 05/26/2024
Products Featured in This Question
Question:
I have a loadrite WV2200L double jet ski trailer. It has ezlub hubs. The one hub seems to be spraying grease when in motion. What service kit do I need for these?
asked by: Brent C
Expert Reply:
Hey Brent, I can definitely point you in the right direction. I do not have a way look up a model of trailer to know exactly what hubs you will need though. If you can tell me the weight capacity of your axle and/or the bearing sizes for your hub I can recommend the correct service kit.
For example, if your trailer has a 2,200 lb axle with the standard 1-1/16" straight spindle, the Dexter Trailer Idler Hub Assembly # 8-259-50UC1 will be the correct replacement hub. The bearing kit will be part # BK1-150. It looks like you already have an order in for these so you should be good to go. Let me know if you have any other questions.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: accessories and parts
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: All About the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Replacement Hub for 1989 Ranger Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: bt150a
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: short hub
- Search Results: hub washer
- Search Results: hub nut
- Search Results: 1250 inch id trailer bearings races seals caps
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight Spindles