94 Shorelander PWC Trailer Replacement Hubs
Updated 08/04/2021 | Published 08/02/2021
Question:
Wondering if you might know the correct hub assembly for my 94 shorelander trailer. I do not know the axle rating. Bearings are L44649. Seal is 471750. DICO 45263 hub. 5x4.5inch lug pattern on 8inch rim. I would guess based on research it would be an BT8 1-1/16inch spline?
asked by: Trent M
Expert Reply:
I recommend the CE Smith Trailer Hub Assembly item # CE13311. These hubs are rated for 2,700-lb Axles have a 5 on 4-1/2 bolt pattern and come pre-greased. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease. They are also made for 8 inch wheels.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: dico
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Replacement Bearing Solution for DICO Hub 45263
- Shop: Camco Vinyl RV Air Conditioner Cover for DuoTherm Models - Black
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Search Results: bt150a
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Search Results: short hub
- Shop: Spare Tire Cover
- Search Results: 1250 inch id trailer bearings races seals caps
- Search Results: hub washer
- Search Results: hub nut
- Search Results: spare tire carrier
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Shop: Grease Seal
- Shop: CE Smith Spare Tire Cover - up to 21" Diameter x 6-1/2" Wide Trailer Tires - Black
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Timken Replacement Bearing Solution for Setup with Part Numbers L44649 471750 L44610
- Q&A: Replacement Double Lip Grease Seal for National Seal 471750
- Q&A: Is There a Trailer Hub that Fits Spindle with 1.06 inch Bearing and 1.25 inch Grease Seal
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Shop: Trailer Hitch
- Shop: Trailer Wiring