Lower Mounting Bracket Not Sitting Level On a 2022 Ford F-350 When Installing Air Lift Air Bags

Updated 05/28/2024 | Published 05/22/2024

Question:

Hello, I have a 2022 Ford F-350, SRW, 4x4 with stock suspension. I am at the point where I have the driver side back slid into place, but it doesnt look level like the adapter is too long. I used Part 690 Lower leg adapter, 4inch axle I measured the axle circumference and did the math to determine the axle is 4. I havent tried to lower the body yet as I am not sure if the 4inch lower leg adapter is the proper one or if the 3.5inch would be better.

asked by: Jesse S

2022 Ford F-350 Air Spring Install
(click to enlarge)

Expert Reply:

Thank you for the image of your installation of the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs # AL55FJ on your 2022 Ford F-350. You are going to want to use one of the shorter lower leg adapters to level out the lower mount. We have found that while the recommended adapters are usually correct there are a few instances where Ford just seems to decide to use a different bump stop block and just need to use the correct adapter to make it as level as possible for the lower mount.

expert reply by: Bud M