Can LED Trailer Mini Clearance & Side Marker Lights be Used For 80 Inch Wide Trailer
Updated 05/23/2024 | Published 05/21/2024
Question:
This light has an SAE PC DOT rating. Can it be used for the P3 application of rear triple lights to indicate 80inch wide trailer? i.e., the center mounted rear three lights mounted on 6inch spacings
asked by: Gary B
0
Expert Reply:
Hello Gary,
Yes, you can use the LED Trailer Mini Clearance and Side Marker Light with Grommet # MCL10RKB for the application of lights on an 80 inch wide trailer.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
LED Trailer Mini Clearance and Side Marker Light with Grommet - Submersible - 1 Diode - Red Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 3/4 Inch Diameter
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Q&A: Lift Kit For 3,300 lb Dexter Torsion Axle On A 2014 Lance Trailer
- Q&A: Looking For Conventional Ramp Door Spring For 7' Wide Trailer With Extremely Heavy Door
- Q&A: Does Optronics LED Trailer Light Use Reflector Ring
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: 12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
- Q&A: Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Gooseneck to 5th Wheel Adapters
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)