Recommended Trailer Hubs For The Timbren Axle-Less Trailer Suspension # ASR2000S01
Updated 05/23/2024 | Published 05/21/2024
Products Featured in This Question
Question:
I currently have a old leaf spring suspension that had a near catastrophic failure. Ultimately the 4-on-4 13 wheel hub needs to be replaced. I recently picked up a used 2000 lb rated Timbren Axle less suspension spindle only. I have two options to either replaced the current hubs with the current wheels or upgrade the wheels to match my 07 Toyota FJ Cruiser. What part numbers do I need to replace the hubs on the the 134 - on 4 or a 17 6 on 5.5 wheel. ?
asked by: David
Expert Reply:
Hey David,
If you got a 2k Timbren Axle-Less Suspension with just the spindle then you most likely have the # ASR2000S01. This uses bearing # L44649 for both the inner and outer bearings and # 10-9 for the grease seal. For a compatible hub you could use the etrailer Easy Grease Trailer Idler Hub Assembly for 2K Axles # AKIHUB-440-2-EZ-2K for a 4 on 4 bolt pattern. There currently isn't a 6 on 5.5 bolt pattern available that's going to be compatible with the spindle. There is a 5 on 4.5 option available with part # AKIHUB-545-2-EZ-2K if you're still wanting to get away from the 4 on 4 bolt pattern.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Q&A: How to Determine if a Trailer Wheel is Hub-centeric or Lug-centric
- Search Results: race tool
- Search Results: bearing tool
- Search Results: 15192tb
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Dust Cap Driver Tool - Small - for 1.986" Grease Caps
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Grease Seal
- Q&A: Replacement Bearings And Grease Seals For A 1996 Shorelandr Boat Trailer
- Q&A: Can Trailer With 2,000 lb Axle Switch From Hub With 4 on 4 to 5 on 5-1/2 Bolt Pattern
- Video: Ultimate Overview of the Timken Replacement Bearing and Race Set
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Search Results: timken grease seal
- Search Results: race l44610 trailer bearings races seals caps
- Search Results: 10 9 grease seal
- Search Results: trailer bearings races seals caps
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Video: Trailer Idler Hub Assembly for 2,500-lb Axles: The Breakdown
- Q&A: Will the 2K Timbren Axle-Less System A20RS545 Work with 15 Inch wheels
- Q&A: Do Pre-Greased Trailer Hubs Require Any Greasing Prior to Install
- Q&A: Recommended Hub and 14-15 Inch Wheel and Tire for Timbren Axle-Less Trailer Suspension
- Q&A: Does Timbren Axle Less System A20RS545 have Rim Diameter Restrictions