Electric Trailer Brake Conversion Recommendation for a 2004 Ranger Trail Boat Trailer
Updated 05/22/2024 | Published 05/20/2024 >
Products Featured in This Question
Question:
Good morning, I am looking for an upgrade for my trailer. It currently has hydraulic disc brakes and I would like to change to electric. The trailer is a 2004 Ranger Trail trailer for a boat, dual axle. Looking for recommendations and if you possibly have an upgrade kit for purchase. Thank you.
asked by: Richard M
Expert Reply:
Hey Richard, thanks for reaching out!
You likely have 3,500 lb axles on your boat trailer, and if this is the case you'll need the following parts:
- Trailer Brake Kit # AKEBRK-35-SA (1 per axle)
- Hub/Drum Kit # AKHD-545-35-EZ-K (2 per axle)
- 10 Gauge Wire # 10-1-1 (sold by foot - needed to run from coupler to brake assemblies)
- Breakaway Battery Kit # 34-285
- Junction Box # 3430001-JBK
- 7-Way Connector # H20043
You only need the junction box and 7-Way connector if you don't already have a 7-Way wiring connector on your trailer.
If you have different axle weight ratings please let me know and I can make adjustments to the parts needed as necessary.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
- Q&A: Can Redarc Tow-Pro Link Bluetooth Brake Controller # RED57AR Work on 2017 Ram 3500 w OEM Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies

