Replacement Axle Recommendation for Older 2K Dexter Trailer Axle
Updated 05/29/2024 | Published 05/20/2024 >
Question:
Looking for a trailer axle s/n 8127019 model SUR. Thanks
asked by: Bryan B
Expert Reply:
Thanks for the serial number and your patience, Bryan!
I was able to get a response from my contact at Dexter Axle who said your 2,000 lb axle has an 80" hub face measurement but that the spring seats were shipped loose so the trailer manufacturer could weld them on wherever they needed to.
We unfortunately don't have any axles that meet this criteria so you'll either need to have a shop custom order you an axle or you can install the Timbren Axle-Less Kit # A20RS545 which bolts to the frame and comes with it's own suspension system.
Attached is an installation video of this Timbren kit for your reference.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: Replacement Trailer Axle For 5' X 8' Ironton Trailer With 15" Diameter Wheels and Tires
- Q&A: Do Timbren Axle-Less Trailer Suspension Systems Require A Frame Support
- Q&A: Solution for Replacement Parts for Boat Trailer With Hub Rubbing Trailer Axle
- Q&A: How Well Do Timbren Axle Less Systems Work as Replacement for Pop Up Campers
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Shop: Ark XO Drop Down Corner RV Stabilizer Jacks - 6" Lift - Black - Qty 2
- Q&A: Solution for Damaged Spindle and Hub on Dexter 2,000 Pound Torsion Axle
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?
- Article: Trailer Lighting Requirements
- Article: Holiday 2025 | RVers’ Favorite Gear & Road Picks
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box

