Hellwig Rear Anti-Sway Bar For A 2021 Ford E350 Class C Motorhome

Updated 05/09/2024 | Published 05/07/2024

Question:

I am installing this sway bar on a 2021 Ford E350 chassis class C motorhome. It has a factory sway bar installed. I removed the factory bar to install this new one. Are the end links installed in the original factory holes in the frame? I have the bar mounted loosely on the axle just inside the shock mounts per instructions. It appears in this position, the end links will be pointed rearward way too much instead of straight up and down. Need some advice on this. Thanks Rob H

asked by: Rob H

Expert Reply:

Hello Rob. The end links for the Hellwig Rear Anti-Sway Bar # HE28RR do mount to the original factory holes in the frame. They should be positioned as vertically as possible. Your motorhome has dual rear wheels, correct? If so, this should be the correct sway bar, so it is hard to say exactly why it is not fitting. If you would like to email over a few pictures I am happy to look into this further and see what can be done

expert reply by: Jesse M