Determining The Correct Replacement Entry Door Latches For A Bloomer Horse Trailer

Question

Question:

I need to purchase 2 keyed alike door latches/locks for a horse trailer Bloomer. Do you have these?

asked by: K.k. L

0

Expert Reply:

Hi,

In order to determine the correct replacement door latches for your horse trailer you'll first need to remove the backing plate for the current latch and measure the cutout hole. Once we know the dimensions we can see if there's a compatible fit.

For example, the Bauer Products Camper Door Lock # BA54FR you were looking at fits cutout holes 2-3/4" wide x 3-3/4" tall.

expert reply by: Kevin C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 4

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

view full answer...

Answer 5

Hey Chris! The Hellwig Front Anti-Sway Bar #HE26GR and Rear Anti-Sway Bar #HE78RR will fit your motorhome. These are confirmed to fit both Class A and Class C motorhomes on the E-450 chassis so you're good either way. Adding front and…

view full answer...

Answer 6

Hey Vitaly, unfortunately the number on the lock core isn't the key number you are looking for. The only place it would be listed is on the key or if you were to remove the door latch it would be on the back of the assembly.

view full answer...

Answer 7

In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…

view full answer...

Answer 8

Hey Mayra, thanks for the information and the picture. The Replacement #921 Lamp Bulb item #VA0415-00 would indeed replace your Hengs Range Hood Model RO624500C lamp. However, I have a better option for you. I recommend the 921/906 LED Light Bulb…

view full answer...

Answer 9

Hey Bill! The only difference between the Global Link RV Entry Door Locking Latch Kit #295-000019 (Black) and #295-000021 (White) is the color. The dimensions and everything else are identical. The latch fits 1-1/4" to 1-1/2" thick doors…

view full answer...

Answer 10

I have a solution for you but there isn't just a replacement converter section for the Elixir ELX-45. You're going to need to replace the entire panel with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger item…

view full answer...

Determining The Correct Replacement Entry Door Latches For A Bloomer Horse Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching