Which Base Plate Fits 2008 Jeep Wrangler Rubicon

Question

Question:

What kit do I need for base plates for 2008 jeep wrangler rubicon

asked by: Orvin C

0

Expert Reply:

Hey Orvin, the etrailer base plate kit part # e98949 that you referenced is a fit for your 2008 Jeep Wrangler Rubicon and would be a great option as it's easy to use and really well made.

expert reply by: Jameson C

0

Answer 1

Hello Chris, You can run the Patriot off an auxiliary 12V battery, but it’s not something I’d recommend as a long-term solution. The unit is designed to pull from the Jeep battery, and the draw is actually pretty low. If your battery is going dead…

view full answer...

Answer 2

Hello Charles, thanks for getting in touch. We do offer base plate from both Blue Ox #BX1126 and our etrailer brand #e98949 that will fit your 2017 Jeep Wrangler Willys. They are similar in a lot of aspects since both are basically different…

view full answer...

Answer 3

Hey Donald, For a diode wiring harness for your 2012 Jeep Wrangler Unlimited being flat towed, what you'll need is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267. I didn't quite understand the full question but this…

view full answer...

Answer 4

The correct Curt Custom Base Plate Kit for a 2011 Jeep Wrangler Rubicon is part #C33FR, not part #C38FR which is for other models with the standard factory bumper.

view full answer...

Answer 5

For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This…

view full answer...

Answer 6

There are no inherent issues with flat towing a Jeep Wrangler, in fact, it is one of the most popular flat-towed vehicles. That said, if you add large aftermarket tires and a lift kit then this will affect its ability to track behind a motorhome…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Which Base Plate Fits 2008 Jeep Wrangler Rubicon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching