Recommended 5 on 4-1/2 Idler Hub for a Dexter D20 Axle
Updated 04/26/2024 | Published 04/20/2024 >
Products Featured in This Question
Question:
I have a Jayco Jay 8 with 4 stud hubs and I would like to replace the hubs with 5 stud hubs to give me more wheel/tire options. The axle part is 2475920. Can you direct me to the correct hub to purchase? I do not need electric brakes. Pic of axle sticker attached. Thank you!
asked by: Daniel B
Expert Reply:
Thanks for the picture and your patience! I just heard back from Dexter and your D20 axle uses the same inner and outer bearing of 1.063" which is item # L44649. I recommend the Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-LF-2K or item # AKIHUB-545-2-LFEZ-2K if you have an EZ lube axle. Both of these idler hubs are sold individually and have a 5 on 4-1/2 lug pattern.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 2200 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 8~258~5uc1~ez
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Spring Seat for a 2,200 lbs Axle w/ a 1-3/4" Diameter
- Q&A: Adding Brakes to a 2015 Jayco Jay Sport 8SD
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: spare tire mount
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Search Results: trailer hubs and drums
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: Is There a Trailer Wheel with a 5 on 4-1/4 inch Bolt Pattern
- Search Results: trailer hitch
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Search Results: trailer leaf springs


