Roof Sealant to be Used with Fiberglass or EPDM Roof Material

Question

Question:

I have a 2016 Forest River Rockwood Mini Lite - 2504S RV trailer. I am not sure what the roof material is on this trailer, either fiberglass or EPDM rubber. I need to replace the roof outer sealant and not sure exactly what I should use. It appears I should not use a silicone base sealant. What do you recommend. Thanks-

asked by: Wayne B

0

Expert Reply:

Hey Wayne, so since you think the roof material is either fiberglass or EPDM the correct sealant you'd want is the Rock River Silicone Sealant # FAS24FR as this can be used with aluminum, galvanized metal, plastic, vinyl, fiberglass, wood, EPDM and TPO roof coverings

expert reply by: Jameson C

0

Answer 1

Hi Willard, Per the manufacturer, the screen by itself is no longer available and now only comes with the frame and screen together, which is the Replacement Screen Frame with Screen #BVC0573-31.

view full answer...

Answer 2

The model and serial number of your vent will be marked with a sticker or stamped on the upper side. Basically open the vent and look down in from the top. It may also be located on the bottom and visible when the screen is removed. The part…

view full answer...

Answer 3

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 4

Hey Terry! The Dometic RV Water Heater #DMC53RR is the closest equivalent replacement to your Atwood G6A-7. This does have the door conversion kit, and the same 6 gallon tank you already have. It requires a cutout measuring 12-3/4" tall x…

view full answer...

Answer 5

Hey Joe, that's a great question but the 7,600 lb capacity for the CE Smith Safety Chains is for the pair and not individually. How much capacity are you needing?

view full answer...

Answer 6

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 7

To install the cradle you want to find center point on the awning. Make sure you have backers. Laying the cradle under the awning while in the stored position. Using the cradle push up on the roll tube approximately 1/8 to a 1/4 inch and mount it…

view full answer...

Answer 8

I believe the CH751 is the lock number. There are various lock numbers that could be in a door handle. The number you provided is a patent number for a double lock T-handle. Such as #L4080 which is the closest match we have to that design.

view full answer...

Answer 9

The yellow wire is the wire that connects to the solar panels. I have attached a detailed wiring diagram and demonstration video for the Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 50 Amp #331-BCDC1250D. In regard to an…

view full answer...

Answer 10

You can absolutely install a roof vent in you roof that is 1-3/4 inches thick; all you need is the MaxxAir Mini Trailer Roof Vent, which fits roofs that are between 1 inch and 4-1/2 inches thick. You can choose from either white or black in color. -…

view full answer...

Answer 11

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Roof Sealant to be Used with Fiberglass or EPDM Roof Material

Product Page this Question was Asked From

Continue Researching