Mounting Brackets for 5th Wheel Rails in 2018 Ram 3500

Question

Question:

I’m looking for a fifth wheel rail mounting bracket kit for a 2018 Ram 3500. I have the rails and hitch. I found your kit but it cautioned fitting my 2018?? Any help? Thanks

asked by: Gary E

0

Expert Reply:

I'm not sure if you have the Curt # C16204 or B&W # BWRVR3210 rails but I see you looked at both so I'll give you the parts for both. The correct mounting brackets for your 2018 Ram 3500 are the # BWRVR2605 if you have the B&W rails and the # CU96FR if you have the Curt rails.

expert reply by: Robin H

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hi Jeremy! B&W does indeed have an option for your 2001 Ford F250. The B&W Patriot 5th Wheel Trailer Hitch w/ Slider and Universal Install Kit - Dual Jaw - 18,000 lbs #BW38XR is a sliding hitch, which is recommended for short bed trucks, and…

view full answer...

Answer 4

Hey Tim, I checked with Demco and the bracket kit part #DM8552027 that you referenced is correct for your 2014 Chevy Silverado 1500. Do you already have the rails and the hitch?

view full answer...

Answer 5

Hey Tim, I can definitely help with that. The Pullrite 3300 works with industry standard 5th wheel rails, and we have exactly the kit you need for your 2019 Ram 2500. Assuming your truck does not have the OEM 5th wheel puck system, you will need the…

view full answer...

Answer 6

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 7

The Curt Custom 5th Wheel Install Kit part #C16443-204 which is a fit for your 2003 Ford F-250/F-350 will use three bolts to secure the base rail to the frame bracket and one bolt to secure the base rail to the bed floor on each side. Therefore, you…

view full answer...

Answer 8

You should have 22" from center to center of the rails (pictured below) in your kit #C16200. I typically get the first rail installed and then drop the hitch I plan on using into the first rail and use it to help set the second rail in place and…

view full answer...

Answer 9

Hello Dean, thanks for reaching out. I do have a good option for you, although we do not have an exact match for the Atwood model R1737BB. Take a look at the GE Profile Propane RV Range #GE24VR. This is a 3 burner gas range with a stainless finish.…

view full answer...

Answer 10

The alarm on the Bright Way #BW94FR is designed to go off whenever the trailer is disconnected. So as soon as it no longer senses power from the 7 way plug on your truck, it will activate the alarm. It sounds like the 7 way plug on your truck only…

view full answer...

Answer 11

I do have an option for you but you can't mix fifth wheel rails and brackets (holes don't line up) so you'll have to purchase both the rails and brackets in a kit. The good news however is that the Husky 15K EZ Roller uses standard rails…

view full answer...

Mounting Brackets for 5th Wheel Rails in 2018 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching