Recommended Hub and Brakes for a 10,000 lbs AL KO Axle
Updated 03/21/2024 | Published 03/18/2024
Products Featured in This Question
Question:
Have 10,000 lb Al Ko axels. Can not find brakes and drums. Serial #36957
asked by: Nick B
Expert Reply:
In order to figure out what drums your 10,000 lbs AL KO axle needs you're going to need to pull one of your current hubs off and check the numbers stamped into the sides of your bearings. If you are unable to find them you will need to take a couple of measurements.
You will be looking for the inner diameter of the bearings. You can measure the bearings, or where they ride on the spindle, using a digital caliper like item # PTW80157. Once this is done you will be able to match them up with the correct replacement hub.
I have attached a diagram showing where to measure.
To replace your 10K AL-KO electric brakes you'll need the Dexter Electric Brake Kit item # 23-450-451 which are self-adjusting 12-1/4" x 3-3/8".
(click to enlarge)
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Q&A: 1" Diameter Equalizer Bolts That is 4" Long and Comes with a Locknut
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Rubber Bushing with Steel Sleeve - 1-1/8" ID, 2-1/8" OD - 3-3/4" Long - Qty 1
- Shop: 10K GD Spring Eye Bolt w/ Grease Zerk
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Equalizer Suspension Bolt with Locknut - 5" Long
- Shop: Trailer Suspension Bolt, 10K GD Spring Eye Bolt
- Shop: Hayes Spring Eye Bushing for 10k Springs
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Q&A: Availability of Spindle and Hubs for 10,000 lb Trailer Axle
- Q&A: Replacement Hub for 10,000 Pound AL-KO Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Search Results: trailer wiring
- Shop: Brake Controller
- Search Results: trailer jack
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: How To Choose Camper Leaf Springs
on Trailer Brakes
