Size Comparison Between the Bulldog Replacement Jack Screw and Nut BD500250 & BD500217
Updated 03/12/2024 | Published 03/11/2024
Question:
Is the BD500250 SMALLER AROUND THAN THE BD500217
asked by: Tanya M
0
Expert Reply:
Hey Tanya, it looks like both the Replacement Jack Screw and Nut Kit for Bulldog Topwind Trailer Jacks with 10,000-lb Lift Capacity BD500250 you're looking and the Replacement Jack Screw and Nut Kit for Bulldog Sidewind Trailer Jacks with 10,000-lb Lift Capacity BD500217 have the same 1.25" diameter.
I've also attached a dimensional diagram showing the rest of the differences between the two for you to check out as well.
expert reply by:
Bryce D
0
BD500250
(click to enlarge)
(click to enlarge)
BD500217
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.13 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Cross Reference a Replacement for a TCM 21334 TB Grease Seal
- Q&A: Correct D-Washer for Spindle That measures 1.06" Where the Bearings Sit
- Q&A: Looking for Replacement Bearing Kit and Grease Cap Kit for 2020 Jayco with 3,500 lb Axles
- Q&A: Will etrailer Electric Trailer Brakes Work As Replacement For Dexter 023-105-00
- Article: Trailer Wiring Diagrams
- Q&A: Do I Need to Get the Roadmaster Comfort Ride System with Shocks and Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Seal For a Timkin 413470 and National 440972
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Brake Controls
- Article: Brake Controller Installation: Starting from Scratch
Tanya M.
3/11/2024
Is there one that is smaller in diameter?