Replacement Trailer Hub for Boat Trailer with Timken Bearings 07100
Published 03/06/2024
Products Featured in This Question
Question:
Have 1950s Era boat trailer with bearings in wheel timken 07100 1 in shaft. 3 1/4 length. Is there a hub assembly available to use for replacement?
asked by: Tom F
0
Expert Reply:
Based on the bearing dimensions that you have you have a 2,000 lb trailer axle so for a replacement hub the part # AKIHUB-545-2-G-2K would work. This has a 5 lug bolt pattern. If instead you have a 4 bolt pattern you'd need the part # CE13110.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Recommended Replacement Hub For Older Boat Trailer With 07100 Bearings
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Bearing Kit to Replace Timken 07100 Bearings on a Boat Trailer
- Q&A: Does Ducted Furrion Chill Cube With Heat Pump Include Remote
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Q&A: Recommended Leaf Springs, U-Bolts, and Suspension Bolts for a 2,000 lbs 1-3/4" Diameter Axle
- Q&A: Replacement Dexter Hub for 8-91A Hub
- Article: Trailer Tire Sizing
- Q&A: Double Lip Grease Seals to Replace Transcom Seal 12192TB
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Best Boat Trailer Jacks