Hole Size and Positioning to Install the B&W Turnoverball In a 2015 Chevrolet Silverado 2500
Updated 03/11/2024 | Published 03/02/2024
Question:
Hello I recently purchased a factory gm puck system from a 2016 2500 HD and I am going to install it in my short bed 2015 2500 HD I have a few questions and any help would be appreciated. 1. What size hole should I drill in the bed so I can purchase the factory puck system covers? 2. Is the center hole at 44 3/4inch from the end of the bed? 3. It looks like I need to remove the bed to install this hitch because it doesnt come apart, is this true? Thanks Jason.
asked by: Jason
Expert Reply:
Jason, to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1012 in your 2015 Chevy 2500 you're going to need to drill out a 4" hole 44 3/4" from the edge of the bed. You don't have to take the bed off for install, but if you can remove it and would rather do it that way, you're more than welcome.
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Flip-Over Ball
- 7500 lbs TW
- 30000 lbs GTW
- Wheel Well Release
- Spring-Loaded Loop
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: b&w turnoverball
- Search Results: gooseneck installation kit
- Shop: Gooseneck Hitch
- Search Results: puck system gooseneck hitch
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: B&W Turnoverball Gooseneck Custom Installation Kit for Chevy/GMC
- Shop: Truck Bed Auxiliary Tank
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Shop: Tool Box
- Video: Installing the B&W Turnoverball Underbed Gooseneck Trailer Hitch in a 2015 Chevrolet Silverado 2500
- Shop: UWS Truck Bed Chest - Wedge Series - Offset Lid - Notched Box - 12 cu ft - Gloss Black
- Shop: UWS Truck Bed Chest - Wedge Series - Offset Lid - 11.8 cu ft - Gloss Black
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Clear Lens
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Search Results: rvk3500
- Search Results: gooseneck hitch trailer safety chains
- Search Results: fifth wheel hitch
- Q&A: Gooseneck Hitch Solution for 2013 Chevy Silverado 3500 Cab and Chassis
- Q&A: Compatibility of B&W Companion Head Between Different Bases for Different Vehicle Manufacturers
- Search Results: camper brakes
- Q&A: Can the B&W Companion Be Used with a Round Gooseneck Hole Opening
- Q&A: How to Convert Older B and W Companion 3000 to Newer Style Companion
- Q&A: Replacement Hardware For B&W Companion Hitch
- Q&A: How To Convert Older Style B and W Companion to Modern Companion
- Q&A: Replacement Base for Older B&W Companion 5th Wheel Hitch That Used U-Bolts
- Video: Ultimate Overview of the Curt 7-Way RV-Style Trailer Connector
- Video: The Low-Down on the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package
- Article: Trailer Wiring Diagrams
on Gooseneck Hitch
Jason
3/5/2024
Bryce thanks for the info, since I am going to install a factory GM puck system does anything change dimensionally? does Etrailer stock the bed puck covers and the gooseneck ball and safety chain hooks? and would you have info on the dimensions for the other 4 holes?