Question About a Product

Question

Question:

Good Afternoon, I was wondering is there another mounting option for the Voyager WiSight 2.0 Wireless RV Backup Camera Monitor - 4.3 Screen other than the one provided? Thank You

asked by: Larry T

0

Expert Reply:

Hi Larry,

Yes, Voyager has a Universal Monitor Mount that's 4" tall # VOSHD4MNT and 6" tall # VOSHD6MNT. These would screw into the back of the monitor and the base could either be screwed down to the dash or you could use some double-sided 3M tape to secure it.

expert reply by: Kevin C

0

Larry

2/22/2024

Hey Kevin, This monitor doesn't have screw holes in the back. Any other thoughts? Thank You. Larry

Kevin C.

3/5/2024

These are the only mounts that Voyager is currently offering so it makes me wonder if you potentially have an older model or something else. Could you send in some pictures of your monitor? Is there a serial number sticker on the back?

Answer 1

The model number WVOM541AP tells me you have the Voyager WiSight Wireless RV Backup Camera Monitor so the correct replacement antenna for the camera will be the Replacement Wireless Antenna for Voyager Backup Camera System part #PXXHD0006301R.

view full answer...

Answer 2

The steps for pairing your Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR camera and monitor are as follows: 1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance…

view full answer...

Answer 3

Hey Steve, thanks for reaching out! The small gold piece is the adapter so that the Antenna Extension #WVOSAPANTEXT is compatible with both the WVCMS130AP and the WVCMS10B. It is not available separately, no. Are you needing this for a Voyager camera…

view full answer...

Answer 4

The Voyager RV Backup Camera Monitor #VOM719WP could realistically be mounted in the dash, but you would have to come up with a way to mount it and run the wires yourself since there is no kit or mount designed for this. Typically this is mounted…

view full answer...

Answer 5

I've attached some pictures showing the size of the ball in the monitor mount of the Voyager RV Observation Camera System w/ Monitor and Mount - 4.3" LCD Monitor Item #VOM43HDCL1B. The ball is a little oblong and the flat portion up top is…

view full answer...

Answer 6

The ball size for the Replacement Suction Cup Mounting Bracket for Voyager Digital Wireless Observation System #PVOS5SCM is going to be 21mm.

view full answer...

Answer 7

Yes, we carry the Replacement 12-Volt DC Power Cord for Voyager LCD Monitor #PXXWVOM541HAR, which is six feet in length and would plug in to the back of your Voyager WVOM541AP monitor. For the suction cup you can use the Replacement Suction Cup…

view full answer...

Answer 8

Hey Pat, We do have the correct replacement suction cup mount for your WiSight 2.0 monitor WVSXM70, though it's different than the one you asked about. Instad, the correct mount is the Replacement Suction Cup Mount Kit for Voyager WiSight 2.0…

view full answer...

Answer 9

Furrion and RVS camera systems use different mounts so the RVS Extendable Monitor Mount #RVS-1419 will not be compatible with your Furrion monitor. But we do offer a couple of universal-type monitor mounts that may be adapted to work with many…

view full answer...

Answer 10

The size of the hardware that would hold the Voyager monitor of part #ASA27FR to the mount #VOSHD6MNT would be M4x6 mm. I would find a local hardware store and bring the monitor and bracket with you to test fit different bolt lengths in this size…

view full answer...

Answer 11

The Voyager Universal Monitor Mount #VOSHD6MNT is the correct mount for the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR. Adjustable monitor mount secures to your dashboard and holds up to a 7 inch monitor. The bracket has a simple…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Question About a Product

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching