How to Get Replacement Key 311 For Fastway Hitch Lock

Question

Question:

I need a new key for my locks. Key code 311. How can I get new keys? Thanks

asked by: Joyce W

0

Expert Reply:

Hi there Joyce. Thanks for the question and it's pretty easy to get key 311 for your Fastway coupler locks. All you have to do is order the following and you're set:

- Replacement Tube Keys for Fastway Universal Coupler Lock - Key 311 # FA-KEY-311

This will get you two keys which is nice as you can keep one for a spare.

expert reply by: Kyle S

0

Answer 1

For your Flash E Series HD Adjustable 2-Ball Mount - 2-1/2" Hitch - 8" Drop, 8" Rise - 18K #FA42-00-2825 is a nice hitch with a lightweight design, so I understand not wanting something really heavy. My recommendation is the…

view full answer...

Answer 2

It sounds like from your history on our site that you're looking for an adjustable ball mount for your 2017 Ford F-350. Of the three ball mounts you looked at, parts #MD206, #FA49-00-5625,and #FA42-00-2825 I like the Fastway #FA42-00-2825 because…

view full answer...

Answer 3

The only difference would be the install of the part #RP26003 or a weld on bracket part #3442. Aside from that they function the same. With the weld on bracket you'll have to find a welder to do the work, but the added thickness of the #RP26003…

view full answer...

Answer 4

The Rock Tamers Heavy-Duty Adjustable Mud Flap System for 2-1/2-Inch Hitches #ERT00110 requires at least 1-inch of available space on the ball mount shank. This 1-inch of clearance between the back of the ball mount face and the trailer hitch…

view full answer...

Answer 5

From the top of the hitch opening down to the lowest portion of the Flash E Series HD Adjustable 2-Ball Mount #FA42-00-2825 when in it's lowest setting measures 14 inches.

view full answer...

Answer 6

I'm not sure if you're looking for rise or drop but the #FA49-00-5925 is the closest to 8" for the Flash Solid Steel HD. The only other option would be on the low side which is #FA49-00-5625. This has a 6" drop and 7" rise. If…

view full answer...

Answer 7

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 8

Yes, the Curt Trailer Hitch Receiver part #C15810 which is a fit for your 2008 Ford F-350 will allow you to tow your 2000 Holiday Rambler Aluma Lite 30SKS without the use of a weight distribution system assuming the figures you provided on the…

view full answer...

Answer 9

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...