How to Determine Which SnapPads are Needed for a 2023 Keystone Cougar

Question

Question:

I was trying to figure out which snap pad I need for a 2023 keystone cougar 22mls. I see there are different sizes. Can you help?

asked by: Bryan J

0

Expert Reply:

All you're going to need to do is take note of the shape, the amount of jacks you have and measure the size of your jack feet.

For instance, if you had 4 6" square feet then you could use the SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems w/ 6" Square Jack Feet # SN99FR you were looking at.

expert reply by: Bryce D

0

Answer 1

Hey Cass, can you measure the feet of your 2024 StarCraft Super Lite? The SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet #SN39FR is designed to fit 5-1/2 inch square feet which might be what you have but I don't…

view full answer...

Answer 2

They sure will Eric! The SnapPad SnapJack QD RV Stabilizer Jack Pads item #SN44VR are exactly what you need for the PSX2 stabilizer jacks. They're going to bolt right up to where the existing jack foot is and stay securely attached with the…

view full answer...

Answer 3

Hello again Stephen! What kind of jacks do you have on your Imagine? If it is the Lippert leveling system with 5-1/2" square feet you need the #SN68FR. If it is a 2-point instead of a 4-point system you can pick up two of the #SN73FR instead. If…

view full answer...

Answer 4

I went out to our warehouse and test fit some SnapPads on the feet of the Lippert High-Speed Power Stabilizer Jack #LC298707 and found that the 6" square SnapPads were a fit. If your 2022 Forest River Vibe travel trailer only has one #LC298707…

view full answer...

Answer 5

Hey Eric. Axle spacing isn't the best way to determine what replacement equalizers you need. The most accurate way to find a replacement is to match up a replacing equalizer as close as possible to the dimensions of the one currently on your…

view full answer...

Answer 6

Hey Judy, yes the MORryde telescoping handrail part #MR54BR that you referenced is correct fit for your 2020 Keystone Cougar 22RBS. This basically fits any RV that has fiberglass walls like what your Cougar has so it would work great.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

How to Determine Which SnapPads are Needed for a 2023 Keystone Cougar

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching