What Is the Weight Capacity of the Flint Hill Goods Locking Hitch Pin

Question

Question:

What weight is the maximum weight that I can tow with this pin?

asked by: Randy S

0

Expert Reply:

Unfortunately trailer hitch pins like the Flint Hill Goods Locking Hitch Pin # FHG63VR do not have weight ratings. Generally 5/8" diameter hitch pins like # FHG63VR, which are for class III, IV, and V hitches, are going to have weight ratings that exceed the max weight capacity of a class V hitch.

expert reply by: Bryce D

0

Answer 1

The Longview hardware #LO53FR is designed to be used with the Longview mirrors #LO54FR, which are then designed to fit a 2020 GMC Sierra 1500 with stock, unmodified mirrors. With these being custom fit to your vehicle, there will not be alternate…

view full answer...

Answer 2

The Longview Custom Towing Mirrors, #LO54FR are a confirmed to fit for the 2021 GMC Sierra 1500, all trim level packages. there is no exception listed for the Denali trim package. I understand what your dealership has stated and that is a common…

view full answer...

Answer 3

We've verified with Longview in the past that their towing mirrors part #LO54FR that fit your 2019 GMC Sierra 1500 Denali do not interfere with the surround cameras, sensors or turn signals. I attached an install video for more info on this as…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Pat! You will get both front and rear tie downs when you purchase the TorkLift Tie Downs item #TL79VV. The item #TL79VV gives you the following parts: TorkLift Camper Tie-Downs - Front - item #TLC2224 TorkLift Camper Tie-Downs - Rear - item…

view full answer...

Answer 7

Hello Sheri, thanks for reaching out. The TorkLift Tie Downs #TL79VV will fit the 2025 GMC Sierra 1500, as long as your factory running boards are cab length only. If they extend beyond the cab to the wheel, they will obstruct the tie downs, but as…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hello David, thanks for getting in touch. The 2019 GMC 1500 AT4 has a 2" lift, and the #AL88388 kit you mentioned has taller brackets to fit the 2" lift. I looked up the X31 model and it does say it has offroad suspension, but it didn't…

view full answer...

Answer 10

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

view full answer...

Answer 11

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

What Is the Weight Capacity of the Flint Hill Goods Locking Hitch Pin

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching