Can Trailer Valet RVR12 Remote-Controlled Trailer Dolly be Used with 8k Triple Axle Trailer

Question

Question:

Can the RVR 12 handle a 3 axle boat trailer weighing 8000 lbs?

asked by: Daniel

0

Expert Reply:

Yes, you can use the Trailer Valet RVR12 Remote-Controlled Trailer Dolly # TV59FR on a triple axle trailer that weighs 8000 lbs. We actually had the chance to use it on a triple axle trailer and found it worked well.

expert reply by: Jameson C

0

RVR12 Used with Triple Axle Trailer
(click to enlarge)

Answer 1

Hey Gene! You're definitely going to want to go with the 12,000 lbs capacity Trailer Valet RVR12 Remote-Controlled Trailer Dolly item #TV59FR. The tongue weight capacity on the item #TVRVR9 is only 900 lbs so it will be way under rated for your…

view full answer...

Answer 2

The Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR battery is not removable from the rover itself. Only the batteries from the remote can be removed and replaced. This is their heaviest duty unit which would work best in a commercial…

view full answer...

Answer 3

Hey Toby, the Trailer Valet RVR12 Remote-Controlled Trailer Dolly item #TV59FR has a 5 degree slope limit on a paved concrete surface. If you have a level app on your iphone (it should have came with one) you can set it on your driveway and it will…

view full answer...

Answer 4

Hey Kevin, yes the 18 inch ball height of the Trailer Valet RVR9 Remote-Controlled Trailer Dolly - Wireless Remote #TV59FR would definitely be tall enough to work great with your Airstream. We had the chance to use this exact model with an Airstream…

view full answer...

Answer 5

For your trailer and situation I recommend the Trailer Valet RVR12 Remote-Controlled Trailer Dolly #TV59FR. This dolly is rated for trailers with a tongue weight up to 1,200lbs and a trailer weight up to 12,000lbs. Your trailer has a maximum trailer…

view full answer...

Answer 6

Yes, the ball mount bases of the Trailer Valet RVR9 part #TVRVR9 and RVR12 part #TV59FR are the same so they would interchange between each other.

view full answer...

Answer 7

Trailer Valet created the XL Mounting Bracket #TVXLMB which will allow you to use their RVR's like the RVR9 #TVRVR9 and RVR12 #TV59FR you looked at without having to use the ball in the coupler. Instead you will remove the hitch ball and lower…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…

view full answer...

Can Trailer Valet RVR12 Remote-Controlled Trailer Dolly be Used with 8k Triple Axle Trailer

Featured Help Information

Miscellaneous Media

Continue Researching