Recommended Replacement Pads for a Yakima Roof Rack

Question

Question:

Hi. Do you sell the foot gripper for the Yakima roof rack? Its the silicon rubber pad between the foot and the roof/edge of the car. Mine are old and theyre detiorating so much theyre slipping backwards. If its unclear what part Im looking for, I can send a screenshot. Please let me know. Thanks!

asked by: Gisele

0

Expert Reply:

We have a few options for replacement pads for Yakima roof racks like item # Y8810008. They are organized by what specific tower they go to. I have linked our entire selection below. If you would like to email me back some information on yours like a part number or your vehicles year make and model I could try to find you a replacement pad that way.

expert reply by: Jerred H

0

Answer 1

In order to find a local dealer for installation purposes, there is a way for you to input your location in order to find dealers close to you. That location for this information is right below the product images and videos. Underneath those…

view full answer...

Answer 2

view full answer...

Answer 3

It sounds like you are talking about the shear block bases #Y8810007 for the Raingutter towers such as #Y8810137. This is a set of 4. Other replacement parts for the Yakima Raingutter 1A towers include: Boot set #Y8810008 Another shear block set…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

It sure is Pete and welcome back! Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is a compatible replacement for your Dometic Power Awning so long as it's 20' wide. The fabric on all those awnings installs the same way. The…

view full answer...

Answer 10

Hey Kevin. Our Replacement Fabric for etrailer Powered RV Awning item #e86QV is just the replacement fabric. It'll attach to your existing awning roller so long as you have a 20' powered awning. There is no stitching built into the fabric for…

view full answer...

Answer 11

Yes, they will Jeff. The etrailer Hitch item #e77ZV fits both the 2025 and 2026 Toyota Camrys. This is a class I hitch with a 1-1/4" receiver that has a 2,000 lbs towing capacity and a maximum tongue weight of 200 lbs. If you're needing a…

view full answer...

Answer 12

Hey Zach, this is a really great question that I don't have a super exact answer for but I can still help. So our hitch manufacturers will basically make a hitch for any vehicle there is a demand for one. Including your 2025 Toyota Camry with the…

view full answer...