How Does Progressive Dynamics 4000 Series Panel Switch to Lithium Mode  

The Progressive Dynamics 4000 Series RV Converter part #PD4060K is already lithium compatible, there's a switch on the circuit board of the converter section which you will flip when charging lithium batteries. I have attached for you below a…

According to Progressive dynamics, the circuit board in your converter is going bad and needs to be replaced using part #PD4060CSV. According to my contact, there's no danger of fire but eventually the converter will stop working.

Thanks for the pictures! The switch didn't get added to the item #PD4060K until 2020. It looks like from your pictures yours does not have it. If this is the original converter that came with your 2018 Forest River that explains why it's not…

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Lithium Charger #PD4045LIKA you reference has been discontinued, and is no longer available from the manufacturer. This product has been replaced with the Progressive Dynamics Mighty Mini…

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA that you referenced only accepts AC power to then convert to a 12 volt charge for your batteries. You could bypass this and run a charge line from your 7-way to…

I do have a simple wiring diagram for the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger - 12V - 45 Amps #PD9245C. Basically you just need to run the power wire from the converter directly to the DC distribution panel and…

Yes, you do need to move the jumper over from the lead acid to the lithium setup and you'd have the higher voltage charging profile.

Hey Greg, so Lithium batteries do require special converters since they charge at a higher voltage. The Progressive Dynamics part #PD4560K18LS8 is lithium compatible and can put out up to 60 amps so it would do a great job keeping your battery bank…

The Charge Wizard button on your Progressive Dynamics PD4560, replaced by the part #PD4560K18LS8, is only designed to be used for lead/acid batteries. This mode is supposed to be turned off when connected to lithium batteries so there is constant…

Lithium batteries have to charge at a much higher voltage than other battery styles so you do need a charger setup that has the lithium profile. Since you have a version of the #PD4060K that doesn't have the lithium option what you'd need the…

To test the converter section voltage output of your Progressive Dynamics RV Power Control Center #PD4560K18LS8 you'll need to be connected to AC shore power and then remove the reverse polarity fuses. You can then place the positive probe of…

The Wago 221 connectors that come with the Progressive Dynamics Panel part #PD4560K18LS8 are used for splicing wires together. It's used for one of the DC install connections that are optional with how this installs. Since it's recommended an…