When you’re pulling heavy trailers, campers, or equipment, you want muscle without unnecessary weight. This hitch handles up to 14,000 lbs on the 2-5/16" ball and 10,000 lbs on the 2" ball. The aluminum body keeps it light and easy to handle, while the stainless-steel balls bring serious durability. It’s strong enough for big hauls but won’t weigh you down when it’s time to swap or stow.
Switching between trailers often means different coupler heights. This hitch gives you both a 6" drop and a 6" rise so you can fine-tune your setup for level towing every time. Keeping the trailer flat helps prevent sway and uneven handling, whether you’re hauling a travel trailer or a loaded utility rig.
Different trailers call for different ball sizes, but changing them shouldn’t slow you down. With both a 2" and a 2-5/16" stainless-steel ball on one platform, all you need to do is flip it to match your trailer’s coupler. The secure pins lock it in tight so there’s no slop or rattle—just set it and tow.
Road salt, rain, and grime can eat through lesser gear fast. The aluminum hitch body and stainless-steel balls resist corrosion season after season. Even the pins are stainless, so they stay clean and functional after long use. It’s a setup that keeps working hard and looking clean without extra upkeep.
This hitch is designed for years of towing without worry. With its durable aluminum body, stainless components, and lifetime warranty coverage, it’s made to stay in service as long as your towing adventures keep rolling.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Bulletproof Hitches aluminum adjustable two ball mount with a six inch drop or rise for a two and a half inch hitch. Has a 14,000 pound maximum gross towing weight capacity. Now this is an aluminum ball mount. Uses a stainless steel dual ball platform that'll slide into your two and a half inch hitch receiver opening and let you hook up your trailer to your tow vehicle. The hitch balls is what'll provide the connection point for your trailer coupler.
And when you do install this into your hitch, it will require a hitch pin and clip or a hitch lock for securing it to your hitch receiver. Those items are not included. We do sell those separate on our website. You do wanna make sure to get one that'll fit a 5/8 inch diameter hole right here. Now the balls we mentioned, they are two different size stainless steel hitch balls.
So this is gonna let you tow trailers with different coupler sizes. Basically you have a two and 5/16 diameter ball here and a two inch ball here. And what's nice about this is to switch the ball, all you have to do is remove these two clips, slide out the pins, rotate the ball platform to what ball size you need, and then reinsert the pins and clips to secure it. Now these adjustment holes right here are one inch apart, so it does adjust in one inch increments. Now I did wanna mention the pins and clips.
If we take out one of the clips here, this one to show you, they are a 5/8 inch diameter, corrosion-resistant, hardened steel pin. Features a nice nickel undercoat on it, has a zinc plating top coat for corrosion resistance, and it comes with the clips. So again, when you just slide those through, you'll just take the clip, line it up with the hole, push it right on, and just like that it'll clip in place and secure it. Now the gross towing weight capacity on this, if you use the two and 5/16 diameter ball is 14,000 pounds. If you flip it over, use the two inch diameter ball, it's 10,000 pounds, tongue weight will be 2,000 pounds.
And we mentioned, you can see it has an adjustable heist to it. So it's gonna let you tow trailers of different heights with the same vehicle. Basically you can mount this in a drop or rise position, if you install it this way, that's in a drop position. Now if we put this at the very bottom holes that you can connect it to, it's gonna get you a maximum drop of six inches, which is measured from the top of the shank to the top of the ball platform. If you would flip this over like this and put it in the rise position and then put this all the way at the very top, the furthest you can go, from here to the top of the ball platform would be six inch. So it's gonna get you a six inch drop or rise. And basically as we mentioned, you just slide this ball platform up or down along the shank, secure it in place with those pins and clips. Now this is a solid lightweight aluminum, uses a nice, sleek, polished finish that won't chip or corrode, and it is machined to extremely tight tolerances for a nice precise fit. Application, again, fits into a two and a half inch by two and a half inch trailer hitch receiver. Last thing I wanna do is just give you a few measurements. We're gonna measure from the distance from the center of the hitch pin hole, there's two of them here, to the center of the ball. So again, if we do from the first hole right here, from the center of it to the center of the ball is eight inches. And if we go to the back hole center to the center ball, nine and one quarter inches. But that's gonna do it for a look at the Bulletproof Hitches aluminum adjustable two ball mount with a six inch drop or rise for a two and a half inch hitch.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Very nicely built hitch. Highly recommend these!
Definitely high quality a little pricey but you get what you payed for
product seems well made lighter then the one made from steel i had it was very heavy thats why i bought it good product
Nice folks order always come quickly
the hitch is perfect!
Beautiful hitch!!! My Boyfriend loves i t!!!
Incredible quality. It’s so beautifully made I hate to use it for towing!
This thing is a TANK. Look forward to putting it on the Sprinter Van for some adventures.
Well built and good price
excellent quality
Well Built
Just got it and only used it once. Looks like it should be good
Compact, well built and lighter weight.
The hitch is well made. The 6” drop works great for hooking up trailers.
Very high quality product. Was getting tired of my steel ball mounts rusting and getting stuck in my hitch.
The cotter pins are cheap looking and are really not secure. Needs some kind of locking pin for safety and security.
Very solid hitch with great machining finish. High capacity rating is confidence-inspiring for towing heavy loads. Only drawback is when using the security locking pins, it's difficult to have two locking pins inserted due to the spacing of the holes. I'm sure it would be just as "secure" with one security locking pin and one standard clevis pin, but I bought the BulletProof 3-locking pin set with the intent for all pins to be secured via lockset.
Great and lightweight
Top notch product and Lauren made sure I was well taken care of !….Highly recommend !
Beautiful fit and finish.
Amazing quality and finish. I debated on several brands but so glad i decided on the bulletproof hitch. I used it the day it arrived and can't be happier with my purchase. E trailer was great to deal with.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.