Will Timbren Suspension Enhancement Affect 2023 Ford F-150 Onboard Scale

Question

Question:

I have a 2023 Ford F150 with the built in scales option, how will these if at all, possibly affect weight readings when I load with cargo?

asked by: Craig

0

Expert Reply:

Installation of the Timbren Rear Suspension Enhancement System # TFR1504E on your 2023 Ford F-150 will impact the scale. The system operates by reading how level the back of your truck is. It will still work for lighter loads but anything that makes you sag to the point the Timbrens engage won't be accurate.

expert reply by: Robin H

0

Answer 1

The toolbox that I recommend using with the RetraxPRO MX Hard Tonneau Cover #RT80384 on your 2019 Ford F-350 Super Duty is the UWS Truck Bed Chest - Wedge Series #UWS01032 as it will butt up next to the canister for your cover and the wedge design…

view full answer...

Answer 2

You are going to want to use a Equal-i-zer Weight Distribution System #EQ37100ET for towing your new camper behind your 2015 Ford F-150. The weight distribution helps to transfer weight to the front of your F-150 which will help regain your normal…

view full answer...

Answer 3

When it comes to installing a rear suspension enhancement system on your 2021 Ford F-150 Powerboost Hybrid 4X4. The Timbren Rear Suspension Enhancement System #TFR1504E will work for your vehicle. The Timbren system has a 6,000 pound capacity, and no…

view full answer...

Answer 4

The Timbren Suspension Enhancement System item #TFRTT1504E has a total height of 6.75” with a 1” spacer. This system is confirmed to fit your 2015 Ford F-150. I have linked an installation video below.

view full answer...

Answer 5

Both of the kits you mentioned are a fit for your 2016 Ford F-150. The difference is that the part #TFR1504E has a 6,000 lb capacity and the part #TFRTT1504E has a 7,000 lb capacity. You would want to go with the lower rated spring as it will be a…

view full answer...

Answer 6

The Timbren Rear Suspension Enhancement System #TFR1504E has a weight capacity of 6,000lbs. The Timbren Suspension Enhancement System #TFRTT1504E has a weight capacity of 7,000lbs. They use identical mounting brackets and hardware just have different…

view full answer...

Answer 7

Hey there Steve; thanks for writing in and when it comes to body roll and sway for your 2018 Ford F-150, the better option is the RoadActive Suspension Custom Leaf Spring Enhancement Kit, with the right one depending on if your F-150 is 2WD or 4WD: -…

view full answer...

Answer 8

With your 6 inch lift, the Timbren springs do have spacer availability, however the #TFRTT1504E is designed for severe service vehicles like tow trucks and would not be ideal in any way for off-road use. I definitely don't suggest Timbren springs…

view full answer...

Answer 9

The Timbren Suspension Enhancement System #TFRTT1504E is a confirmed fit for your truck. With a 1,100 lb tongue weight trailer, this system will help to keep the rear end from squatting and your headlights from being too high to see the road as…

view full answer...

Answer 10

The Timbren Rear Suspension Enhancement System #TFR1504E is a fit for a factory height 2017 or 2018 Ford F-150. To drop the truck height will require custom fabrication as you stated. There isn't a spacer, just the brackets and the jounce spring,…

view full answer...

Answer 11

The Timbren Suspension Enhancement System - Rear Axle #TFRTT1504E once the brackets are installed on the top and bottom and with the integrated spacer will give you 1-1/2 inch of clearance between the jounce spring and bracket compared to the 4-1/2…

view full answer...

Answer 12

The Timbren Rear Suspension Enhancement System part #TFR1504E is a good option for a 2020 Ford F-150 but the suspension has to reach a threshold before they engage and they do compress when this is done so you will still sag a bit while they are…

view full answer...